| Customization: | Available |
|---|---|
| Customized: | Customized |
| Standard: | API |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Elasatomer Sealed Roller Bearing Bit
The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
Gauge Structure: Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Sealed Bearing Structure:
1. Abrasion resistance and seizure resistance of the bearing are improved.
2. Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance.
Available Size:
5 7/8", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 12 1/4", 13 5/8", 14 3/4", 15", 15 1/2", 17 1/2", 22", 24", 26", etc.
IADC Code: 1-- Series, 2-- Series, 3- Series
Normal IADC:
437Soft Formation TCI Tricone Bits:
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517Medium Formation TCI Tricone Bits:
The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard formation. The HSN rubber O-ring provides adequate sealing for bearing durability.
637Hard Formation TCI Tricone Bits:
The 637 bits can be used to drill hard and abrasive formation. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.
617Medium-Hard Formation TCI Tricone Bits:
The 617 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
|
IADC
|
WOB
|
RPM
|
Application
|
|
(KN/mm)
|
(r/min)
|
||
|
111/114/115
|
0.3-0.75
|
200-80
|
very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk
|
|
116/117
|
0.35-0.8
|
150-80
|
very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk
|
|
121
|
0.3-0.85
|
200-80
|
soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone
|
|
124/125
|
|
180-60
|
|
|
131
|
0.3-0.95
|
180-80
|
soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds
|
|
136/137
|
0.35-1.0
|
120-60
|
|
|
211/241
|
0.3-0.95
|
180-80
|
medium formations with high compressive strength, like medium, soft shake, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbeds.
|
|
216/217
|
0.4-1.0
|
100-60
|
|
|
246/247
|
0.4-1.0
|
80-50
|
medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite
|
|
321
|
0.4-1.0
|
150-70
|
medium abrasive formations, like abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble
|
|
324
|
0.4-1.0
|
120-50
|
|
|
437/447/435
|
0.35-0.9
|
240-70
|
very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk, gypsum, salt, soft limestone
|
|
517/527/515
|
0.35-1.0
|
220-60
|
soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone
|
|
537/547/535
|
0.45-1.0
|
220-50
|
soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds
|
|
617/615
|
0.45-1.1
|
200-50
|
medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite
|
|
637/635
|
0.5-1.1
|
180-40
|
hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble
|
|
Note: Above limits of WOB and RRPM should not be used simultaneously
|
|||
|
Size
|
Steel tooth bit
|
TCI bit
|
|
|
in
|
mm
|
Weight(kgs)
|
Weight(kgs)
|
|
3 7/8
|
98.4
|
5
|
6
|
|
4 5/8
|
117.5
|
6
|
6.5
|
|
5 7/8
|
149.2
|
17
|
18
|
|
6
|
152.4
|
18
|
19.5
|
|
6 1/2
|
165.1
|
19
|
22
|
|
7 7/8
|
200
|
29
|
29.5
|
|
8 1/2
|
215.9
|
35
|
38
|
|
8 3/4
|
222.2
|
36
|
40
|
|
9 1/2
|
241.3
|
57
|
59
|
|
9 7/8
|
250.8
|
58
|
60
|
|
10 5/8
|
269.9
|
66
|
74
|
|
12 1/4
|
311.1
|
85
|
111
|
|
13 5/8
|
346.1
|
118
|
120
|
|
14 3/4
|
374.6
|
140
|
160
|
|
17 1/2
|
444.5
|
230
|
255
|
|
20
|
508
|
428
|
443
|
|
22
|
558.8
|
520
|
560
|
|
26
|
660.4
|
720
|
810
|
1. As a professional oil and gas service company, Boban petroleum has many good experience is selling and serve for the oilfield industries, quality is the culture of the company, we obtained the API standard for all the oiltools, and also certified by ISO:9001-2000.
2. Good service for the communication, delivery and after sales.
3. With rich experience, so we can be your long term supplier.
4. Own factories in China mainland
5. QUALITY SESTEM to make sure the superior high quality
6. Large product series for one-stop service
7. Consulting, suggesting, help find perfect solution
){kind=link}