| Customization: | Available |
|---|---|
| After-sales Service: | 24/7 |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydrocyclones is also called cyclone separator. Hydrocyclones include hydrocyclone desander (10inch cone) and hydrocyclone desilter (4inch cone), which is used to separate sand and silt from the drilling fluid. Centrifugal pump is used to pump the drilling fluids from mud tank into the set of hydrocyclones.
Features
1.Long service life due to the good performance of the polyurethane material.
2. Low capital cost.
3. High efficiency for 5 - 200 micron particles.
4. Lack of moving parts reduces wear.
5. Continuous or batch removal of underflow requires virtually no downtime for maintenance or recovery.
6. Small relative to other separation equipment.
7. Can operate at a wide range of temperatures and pressures.
| HYDROCYCLONE SPECIFICATIONS | ||||
| Specifications | Diameter(mm) | Inlet Pressure(MPa) | Capacity(m3/h) | Cut Size(μm) |
| FX840 | 840 | 0.04-0.15 | 500-900 | 74-350 |
| FX710 | 710 | 0.04-0.15 | 400-550 | 74-250 |
| FX 660 | 660 | 0.04-0.15 | 160-450 | 74-220 |
| FX610 | 610 | 0.04-0.15 | 200-300 | 74-200 |
| FX500 | 500 | 0.04-0.2 | 140-240 | 74-200 |
| FX400 | 400 | 0.04-0.2 | 100-170 | 74-150 |
| FX350 | 350 | 0.04-0.2 | 70-160 | 50-150 |
| FX300 | 300 | 0.04-0.2 | 45-90 | 50-150 |
| FX250 | 250 | 0.04-0.3 | 40-80 | 40-100 |
| FX200 | 200 | 0.04-0.3 | 25-40 | 40-100 |
| FX150 | 150 | 0.04-0.3 | 14-35 | 20-74 |
| FX125 | 125 | 0.04-0.3 | 8-20 | 20-50 |
| FX100 | 100 | 0.04-0.3 | 8-20 | 20-50 |
| FX75 | 75 | 0.1-0.4 | 4-10 | 10-40 |
| FX50 | 50 | 0.1-0.4 | 2-5 | 7-40 |
| FX25 | 25 | 0.1-0.6 | 0.3-1 | 5-20 |
| FX10 | 10 | 0.1-0.6 | 0.05-0.1 | 1-5 |
){kind=link}